the comparative analysis between ?Piston Flow Switches? and ?Electromagnetic Flow Meters?

Here is the professional English translation of the comparative analysis between ?Piston Flow Switches? and ?Electromagnetic Flow Meters?, maintaining technical precision and structural clarity:

? ?I. Core Functional Differences?

Feature? ?Piston Flow Switch? ?Electromagnetic Flow Meter?

Primary Function? Detects if flow reaches preset threshold; outputs switching signal (ON/OFF) Measures flow value precisely; outputs continuous signal (e.g., 4-20mA, pulse)

Signal Type? Binary signal (relay contact, NPN/PNP) Analog or digital signal (instantaneous/totalized flow)

Typical Application? Pump start/stop control, dry-run alarm, safety interlock Process optimization, energy analysis, trade settlement

Accuracy? Lower (±5%–±10%)? High (±0.1%–±0.5%)?

?? ?II. Working Principle Comparison?

Piston Flow Switch?

Mechanical Trigger?: Fluid drives an internal magnetic piston, actuating an external reed switch to open/close?.

Compatible Media?: Liquids/gases (low particulate), high-viscosity fluids (e.g., lubricating oil)?.

Electromagnetic Flow Meter?

Electromagnetic Induction?: Based on Faraday’s law; conductive fluid cutting magnetic field generates voltage proportional to flow velocity?.

Media Limitations?: Only for liquids with conductivity ≥5μS/cm (e.g., water, acids/alkalis); incompatible with oils/gases?.

?? ?III. Key Technical Parameters?

Parameter? ?Piston Flow Switch? ?Electromagnetic Flow Meter?

Response Time? Fast (milliseconds)? Slower (seconds)?

Turndown Ratio? Narrow (1:5–1:10)? Wide (1:20–1:50)?

Pressure Drop? Very low (≤0.3 Bar)? Moderate (pipe-size dependent)?

Pressure Rating? Up to 100 Bar (SS housing)? Typically ≤40 Bar?

?? ?IV. Typical Application Scenarios?

Piston Flow Switch Applications?

Fire pump control: Activates pump when flow ≥20% setpoint?.

Compressed air systems: Gas flow anomaly alarms?.

Electromagnetic Flow Meter Applications?

Wastewater plants: Precise flow measurement/billing?.

Chemical processes: Corrosive media monitoring (e.g., acids/alkalis)?.

? ?V. Key Selection Considerations?

Piston Flow Switch?

Vertical installation requires upward flow only? to prevent piston sedimentation?.

Install ≥80-mesh filter to avoid debris jamming?.

Electromagnetic Flow Meter?

Full-pipe requirement?: Incomplete filling or air bubbles cause measurement failure?.

Avoid strong EMI?: Motors/transformers disrupt magnetic field accuracy?.

Summary?: Piston flow switches are ?cost-effective on-off controllers? for simple start/stop logic; electromagnetic flow meters are ?high-precision instruments? for conductive liquid metering?.

Key Terminology:

量程比 → ?Turndown ratio?

干簧管 → ?Reed switch?

法拉第定律 → ?Faraday’s law?

電導率 → ?Conductivity?

滿管要求 → ?Full-pipe requirement?

電磁干擾 → ?EMI (Electromagnetic Interference)?

This translation preserves original section icons (??????????), technical annotations (#), and comparative logic, meeting international engineering documentation standards.